AppleIntelInfo.kext v1.6

I am working on a massive update of AppleIntelInfo.kext and slowly working towards v2.0 but I need feedback, so what I have available for you right now is the source code of v1.6 And what else is more self explanatory… as the new self explanatory output of AppleIntelInfo.kext itself:

AppleIntelInfo.kext v1.6 Copyright © 2012-2016 Pike R. Alpha. All rights reserved

Settings:
------------------------------------
logMSRs............................: 1
logIGPU............................: 1
logCStates.........................: 1
logIPGStyle........................: 1
InitialTSC.........................: 0x4cfcc0f7c8e
MWAIT C-States.....................: 1319200

Model Specific Registers (MSRs)
---------------------------------------

MSR_CORE_THREAD_COUNT..........(0x35) : 0x40008
----------------------------------------
- Core Count......................... : 4
- Thread Count....................... : 8

MSR_PLATFORM_INFO..............(0xCE) : 0x80838F1012200
----------------------------------------
- Maximum Non-Turbo Ratio............ : 34
- Ratio Limit for Turbo Mode......... : 1 (programmable)
- TDP Limit for Turbo Mode........... : 1 (programmable)
- Low Power Mode Support............. : 0 (LMP not supported)
- Number of ConfigTDP Levels......... : 0 (only base TDP level available)
- Maximum Efficiency Ratio........... : 8
- Minimum Operating Ratio............ : 8

MSR_PMG_CST_CONFIG_CONTROL.....(0xE2) : 0x7E000008
----------------------------------------
- I/O MWAIT Redirection Enable....... : 0 (not enabled)
- CFG Lock........................... : 0 (MSR not locked)
- C3 State Auto Demotion............. : 1 (enabled)
- C1 State Auto Demotion............. : 1 (enabled)
- C3 State Undemotion................ : 1 (enabled)
- C1 State Undemotion................ : 1 (enabled)
- Package C-State Auto Demotion...... : 1 (enabled)
- Package C-State Undemotion......... : 1 (enabled)

MSR_PMG_IO_CAPTURE_BASE........(0xE4) : 0x31814
----------------------------------------
- LVL_2 Base Address................. : 0x1814
- C-state Range...................... : 3 (C-States not included, I/O MWAIT redirection not enabled)

IA32_MPERF.....................(0xE7) : 0x33E0B3CD05
IA32_APERF.....................(0xE8) : 0xC9C422E20

MSR_FLEX_RATIO.................(0x194) : 0x0
----------------------------------------

MSR_IA32_PERF_STATUS...........(0x198) : 0x274F00002500
----------------------------------------
- Current Performance State Value.... : 0x2500

MSR_IA32_PERF_CONTROL..........(0x199) : 0x2800
----------------------------------------
- Target performance State Value..... : 0x2800
- Intel Dynamic Acceleration......... : 0 (IDA engaged)

IA32_CLOCK_MODULATION..........(0x19A) : 0x0
IA32_THERM_STATUS..............(0x19C) : 0x884B0800

IA32_MISC_ENABLES..............(0x1A0) : 0x850089
----------------------------------------
- Fast-Strings....................... : 1 (enabled)
- Automatic Thermal Control Circuit.. : 1 (enabled)
- Performance Monitoring............. : 1 (available)
- Enhanced Intel SpeedStep Technology : 1 (enabled)

MSR_MISC_PWR_MGMT..............(0x1AA) : 0x18C1
----------------------------------------
- EIST Hardware Coordination......... : 1 (disabled)

MSR_TURBO_RATIO_LIMIT..........(0x1AD) : 0x25262728
----------------------------------------
- Maximum Ratio Limit for C00........ : 40
- Maximum Ratio Limit for C01........ : 39
- Maximum Ratio Limit for C02........ : 38
- Maximum Ratio Limit for C03........ : 37

IA32_ENERGY_PERF_BIAS..........(0x1B0) : 0x1
----------------------------------------
- Power Policy Preference.............: 1 (highest performance)

MSR_POWER_CTL..................(0x1FC) : 0x2C005F
MSR_RAPL_POWER_UNIT............(0x606) : 0xA0E03
MSR_PKG_POWER_LIMIT............(0x610) : 0x42FFD0001A8208
MSR_PKG_ENERGY_STATUS..........(0x611) : 0x6ACF78F
MSR_PKG_POWER_INFO.............(0x614) : 0x208
MSR_PP0_POWER_LIMIT............(0x638) : 0x0
MSR_PP0_ENERGY_STATUS..........(0x639) : 0x5754BCB
MSR_TURBO_ACTIVATION_RATIO.....(0x64C) : 0x0
MSR_PKGC6_IRTL.................(0x60b) : 0x8876
MSR_PKGC7_IRTL.................(0x60c) : 0x8894
MSR_PKG_C2_RESIDENCY...........(0x60d) : 0x2FD0B893448
MSR_PKG_C3_RESIDENCY...........(0x3f8) : 0x0
MSR_PKG_C6_RESIDENCY...........(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY...........(0x3fa) : 0x0
IA32_TSC_DEADLINE..............(0x6E0) : 0x4CFCF5A38F1
MSR_PPERF......................(0x63E) : 0xFFFFFF802ADF09F0 (122)

IA32_PM_ENABLE.................(0x770) : 0x3700000000 (HWP Enabled)

IA32_HWP_CAPABILITIES..........(0x771) : 0x1102228
----------------------------------------
- Highest Performance................ : 40
- Guaranteed Performance............. : 34
- Most Efficient Performance......... : 16
- Lowest Performance................. : 1

IA32_HWP_INTERRUPT.............(0x773) : 0x0
----------------------------------------
- Guaranteed Performance Change...... : 0 (Interrupt generation disabled)
- Excursion Minimum.................. : 0 (Interrupt generation disabled)

IA32_HWP_REQUEST...............(0x774) : 0x8000FF01
----------------------------------------
- Minimum Performance................ : 1
- Maximum Performance................ : 255
- Desired Performance................ : 0
- Energy Efficient Performance....... : 128
- Activity Window.................... : 0, 0
- Package Control.................... : 0

IA32_HWP_STATUS................(0x777) : 0x0
----------------------------------------
- Guaranteed Performance Change...... : 0 (has not occured)
- Excursion To Minimum............... : 0 (has not occured)

CPU Ratio Info:
----------------------------------------
CPU Maximum Efficiency Ratio...........: 800 MHz
CPU Maximum non-Turbo Frequency........: 3400 MHz
CPU Maximum Turbo Frequency............: 4000 MHz

IGPU Info:
----------------------------------------
IGPU Current Frequency.................: 0 MHz
IGPU Minimum Frequency.................: 350 MHz
IGPU Maximum Non-Turbo Frequency.......: 350 MHz
IGPU Maximum Turbo Frequency...........: 1150 MHz
IGPU Maximum limit.....................: No Limit

Now what?

It should be pretty straightforward for developers, but just in case you don’t know what to do. This should help:

1.) Download the updated source code.
2.) Compile it with Xcode.
3.) cd /Library/Developer/Xcode/DerivedData/AppleIntelInfo-*/Build/Products/Debug
4.) sudo chown -R root:wheel AppleIntelInfo.kext
5.) sudo chmod -R 755 AppleIntelInfo.kext
6.) sudo kextload AppleIntelInfo.kext

What is next?

I also have a new command line tool in the works that will output the same kind of (MSR) data but I won’t release it until after AppleIntelInfo.kext is done.

Update: Ok. Many thanks for the feedback and output of the updated kext. You may have noticed that I started to fix a couple of issues, and there is a lot more to do for me. I’ll get back to you when I am done with the next set of changes. Again. Thanks again for your feedback!

19 thoughts on “AppleIntelInfo.kext v1.6

  1. Looking forward to playing with this on a Z10PE-D8 if i can ever get it to install OS X.
    Going slightly OT here, but you have mentioned that you have managed to get every Asus board to boot with your RevoBoot, does that include the above board ?

      • Many thanks – This board now comes with a firmware file too, so if it’s of any use to you and your research, it’s available from their website. I haven’t unpacked it to look at it properly as it’s an .ima file but looked at it with HexEdit and it seems to be pretty much all .js files

  2. Hi Pike
    I tested AppleIntelinfo V1.6
    Thank you.

    AppleIntelInfo.kext v1.6 Copyright © 2012-2016 Pike R. Alpha. All rights reserved

    Settings:

  3. This is my output Pikeralpha:

    AppleIntelInfo.kext v1.6 Copyright © 2012-2016 Pike R. Alpha. All rights reserved

    Settings:
    ------------------------------------
    logMSRs............................: 1
    logIGPU............................: 0
    logCStates.........................: 1
    logIPGStyle........................: 1
    InitialTSC.........................: 0x374ab3e0049 (111 MHz)
    MWAIT C-States.....................: 8480

    Model Specific Registers (MSRs)
    ---------------------------------------

    MSR_CORE_THREAD_COUNT..........(0x35) : 0x6000C
    ----------------------------------------
    - Core Count......................... : 6
    - Thread Count....................... : 12

    MSR_PLATFORM_INFO..............(0xCE) : 0x20080C3BF3812200
    ----------------------------------------
    - Maximum Non-Turbo Ratio............ : 34
    - Ratio Limit for Turbo Mode......... : 1 (programmable)
    - TDP Limit for Turbo Mode........... : 1 (programmable)
    - Low Power Mode Support............. : 1 (LPM supported)
    - Number of ConfigTDP Levels......... : 1 (additional TDP level(s) available)
    - Maximum Efficiency Ratio........... : 12
    - Minimum Operating Ratio............ : 8

    MSR_PMG_CST_CONFIG_CONTROL.....(0xE2) : 0x403
    ----------------------------------------
    - I/O MWAIT Redirection Enable....... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)
    - CFG Lock........................... : 0 (MSR not locked)
    - C3 State Auto Demotion............. : 0 (disabled/unsupported)
    - C1 State Auto Demotion............. : 0 (disabled/unsupported)
    - C3 State Undemotion................ : 0 (disabled/unsupported)
    - C1 State Undemotion................ : 0 (disabled/unsupported)
    - Package C-State Auto Demotion...... : 0 (disabled/unsupported)
    - Package C-State Undemotion......... : 0 (disabled/unsupported)

    MSR_PMG_IO_CAPTURE_BASE........(0xE4) : 0x10414
    ----------------------------------------
    - LVL_2 Base Address................. : 0x414
    - C-state Range...................... : 1 (C6 is the max C-State to include
    )

    IA32_MPERF.....................(0xE7) : 0xB84920AE0
    IA32_APERF.....................(0xE8) : 0xB35A6FEE5
    MSR_0x150......................(0x150) : 0x0

    MSR_FLEX_RATIO.................(0x194) : 0xE0000
    ----------------------------------------

    MSR_IA32_PERF_STATUS...........(0x198) : 0x229B00002300
    ----------------------------------------
    - Current Performance State Value.... : 0x2300

    MSR_IA32_PERF_CONTROL..........(0x199) : 0x2600
    ----------------------------------------
    - Target performance State Value..... : 0x2600
    - Intel Dynamic Acceleration......... : 0 (IDA engaged)

    IA32_CLOCK_MODULATION..........(0x19A) : 0x0
    IA32_THERM_STATUS..............(0x19C) : 0x884A0000

    IA32_MISC_ENABLES..............(0x1A0) : 0x850089
    ----------------------------------------
    - Fast-Strings....................... : 1 (enabled)
    - Automatic Thermal Control Circuit.. : 1 (enabled)
    - Performance Monitoring............. : 1 (available)
    - Enhanced Intel SpeedStep Technology : 1 (enabled)

    MSR_MISC_PWR_MGMT..............(0x1AA) : 0x402000
    ----------------------------------------
    - EIST Hardware Coordination......... : 0 (enabled)

    MSR_TURBO_RATIO_LIMIT..........(0x1AD) : 0x2323232323232626
    ----------------------------------------
    - Maximum Ratio Limit for C01........ : 38
    - Maximum Ratio Limit for C02........ : 38
    - Maximum Ratio Limit for C03........ : 35
    - Maximum Ratio Limit for C04........ : 35
    - Maximum Ratio Limit for C05........ : 35
    - Maximum Ratio Limit for C06........ : 35

    IA32_ENERGY_PERF_BIAS..........(0x1B0) : 0x0
    ----------------------------------------
    - Power Policy Preference.............: 0 (highest performance)

    MSR_POWER_CTL..................(0x1FC) : 0x2104005B
    MSR_RAPL_POWER_UNIT............(0x606) : 0xA0E03
    MSR_PKG_POWER_LIMIT............(0x610) : 0x7FFD00014EA82
    MSR_PKG_ENERGY_STATUS..........(0x611) : 0x55105AB
    MSR_PKG_POWER_INFO.............(0x614) : 0x1700460
    MSR_PP0_POWER_LIMIT............(0x638) : 0x14FFD0
    MSR_PP0_ENERGY_STATUS..........(0x639) : 0x0
    MSR_TURBO_ACTIVATION_RATIO.....(0x64C) : 0x0
    MSR_PKGC3_IRTL.................(0x60a) : 0x0
    MSR_PKGC6_IRTL.................(0x60b) : 0x0
    MSR_PKG_C2_RESIDENCY...........(0x60d) : 0x0
    MSR_PKG_C3_RESIDENCY...........(0x3f8) : 0x0
    MSR_PKG_C2_RESIDENCY...........(0x60d) : 0x0
    MSR_PKG_C6_RESIDENCY...........(0x3f9) : 0x0
    IA32_TSC_DEADLINE..............(0x6E0) : 0x374AE60CC34

    CPU Ratio Info:
    ----------------------------------------
    CPU Maximum Efficiency Ratio...........: 1200 MHz
    CPU Maximum non-Turbo Frequency........: 3400 MHz
    CPU Maximum Turbo Frequency............: 3800 MHz

    Edit:I forgot to mention that i’m using clover and also using NullCPUPowerManagement.kext, so i’ve read this will negate my SSDT.aml file for power management, hope this is of help

  4. Hello Pike

    test run Appleintelinfo.kext

    AppleIntelInfo.kext v1.6 Copyright © 2012-2016 Pike R. Alpha. All rights reserved

    Settings:
    ------------------------------------
    logMSRs............................: 1
    logIGPU............................: 1
    logCStates.........................: 1
    logIPGStyle........................: 1
    InitialTSC.........................: 0x1746b62318a (45 MHz)
    MWAIT C-States.....................: 270624

    Model Specific Registers (MSRs)
    ---------------------------------------

    MSR_CORE_THREAD_COUNT..........(0x35) : 0x40008
    ----------------------------------------
    - Core Count......................... : 4
    - Thread Count....................... : 8

    MSR_PLATFORM_INFO..............(0xCE) : 0x80838F3012300
    ----------------------------------------
    - Maximum Non-Turbo Ratio............ : 35
    - Ratio Limit for Turbo Mode......... : 1 (programmable)
    - TDP Limit for Turbo Mode........... : 1 (programmable)
    - Low Power Mode Support............. : 0 (LMP not supported)
    - Number of ConfigTDP Levels......... : 0 (only base TDP level available)
    - Maximum Efficiency Ratio........... : 8
    - Minimum Operating Ratio............ : 8

    MSR_PMG_CST_CONFIG_CONTROL.....(0xE2) : 0x1E000005
    ----------------------------------------
    - I/O MWAIT Redirection Enable....... : 0 (not enabled)
    - CFG Lock........................... : 0 (MSR not locked)
    - C3 State Auto Demotion............. : 1 (enabled)
    - C1 State Auto Demotion............. : 1 (enabled)
    - C3 State Undemotion................ : 1 (enabled)
    - C1 State Undemotion................ : 1 (enabled)
    - Package C-State Auto Demotion...... : 0 (disabled/unsupported)
    - Package C-State Undemotion......... : 0 (disabled/unsupported)

    MSR_PMG_IO_CAPTURE_BASE........(0xE4) : 0x21814
    ----------------------------------------
    - LVL_2 Base Address................. : 0x1814
    - C-state Range...................... : 2 (C-States not included, I/O MWAIT redirection not enabled)

    IA32_MPERF.....................(0xE7) : 0x368AAE9BF
    IA32_APERF.....................(0xE8) : 0x3BCC82675

    MSR_FLEX_RATIO.................(0x194) : 0xE0000
    ----------------------------------------

    MSR_IA32_PERF_STATUS...........(0x198) : 0x252D00002600
    ----------------------------------------
    - Current Performance State Value.... : 0x2600

    MSR_IA32_PERF_CONTROL..........(0x199) : 0x2700
    ----------------------------------------
    - Target performance State Value..... : 0x2700
    - Intel Dynamic Acceleration......... : 0 (IDA engaged)

    IA32_CLOCK_MODULATION..........(0x19A) : 0x0
    IA32_THERM_STATUS..............(0x19C) : 0x88420000

    IA32_MISC_ENABLES..............(0x1A0) : 0x850089
    ----------------------------------------
    - Fast-Strings....................... : 1 (enabled)
    - Automatic Thermal Control Circuit.. : 1 (enabled)
    - Performance Monitoring............. : 1 (available)
    - Enhanced Intel SpeedStep Technology : 1 (enabled)

    MSR_MISC_PWR_MGMT..............(0x1AA) : 0x400001
    ----------------------------------------
    - EIST Hardware Coordination......... : 1 (disabled)

    MSR_TURBO_RATIO_LIMIT..........(0x1AD) : 0x25262727
    ----------------------------------------
    - Maximum Ratio Limit for C01........ : 39
    - Maximum Ratio Limit for C02........ : 39
    - Maximum Ratio Limit for C03........ : 38
    - Maximum Ratio Limit for C04........ : 37

    IA32_ENERGY_PERF_BIAS..........(0x1B0) : 0x1
    ----------------------------------------
    - Power Policy Preference.............: 1 (highest performance)

    MSR_POWER_CTL..................(0x1FC) : 0x4005F
    MSR_RAPL_POWER_UNIT............(0x606) : 0xA0E03
    MSR_PKG_POWER_LIMIT............(0x610) : 0x42FFFF001AFFFF
    MSR_PKG_ENERGY_STATUS..........(0x611) : 0x3EC92BD
    MSR_PKG_POWER_INFO.............(0x614) : 0x2A0
    MSR_PP0_POWER_LIMIT............(0x638) : 0x0
    MSR_PP0_ENERGY_STATUS..........(0x639) : 0x2172D25
    MSR_TURBO_ACTIVATION_RATIO.....(0x64C) : 0x0
    MSR_PP1_POWER_LIMIT............(0x640) : 0x0
    MSR_PP1_ENERGY_STATUS..........(0x641) : 0x3C1C7
    MSR_PP1_POLICY.................(0x642) : 0x18
    MSR_CONFIG_TDP_NOMINAL.........(0x648) : 0x23
    MSR_CONFIG_TDP_LEVEL1..........(0x649) : 0x0
    MSR_CONFIG_TDP_LEVEL2..........(0x64a) : 0x0
    MSR_CONFIG_TDP_CONTROL.........(0x64b) : 0x80000000
    MSR_TURBO_ACTIVATION_RATIO.....(0x64c) : 0x0
    MSR_PKGC3_IRTL.................(0x60a) : 0x8842
    MSR_PKGC6_IRTL.................(0x60b) : 0x8873
    MSR_PKGC7_IRTL.................(0x60c) : 0x8891
    MSR_PKG_C2_RESIDENCY...........(0x60d) : 0x120907B2D00
    MSR_PKG_C3_RESIDENCY...........(0x3f8) : 0x0
    MSR_PKG_C6_RESIDENCY...........(0x3f9) : 0x0
    MSR_PKG_C7_RESIDENCY...........(0x3fa) : 0x0
    IA32_TSC_DEADLINE..............(0x6E0) : 0x1746ED54153

    CPU Ratio Info:
    ----------------------------------------
    CPU Maximum Efficiency Ratio...........: 800 MHz
    CPU Maximum non-Turbo Frequency........: 3500 MHz
    CPU Maximum Turbo Frequency............: 3900 MHz

    IGPU Info:
    ----------------------------------------
    IGPU Current Frequency.................: 200 MHz
    IGPU Minimum Frequency.................: 200 MHz
    IGPU Maximum Non-Turbo Frequency.......: 350 MHz
    IGPU Maximum Turbo Frequency...........: 1250 MHz
    IGPU Maximum limit.....................: No Limit


  5. AppleIntelInfo.kext v1.6 Copyright © 2012-2016 Pike R. Alpha. All rights reserved

    Settings:
    ------------------------------------
    logMSRs............................: 1
    logIGPU............................: 0
    logCStates.........................: 1
    logIPGStyle........................: 1
    InitialTSC.........................: 0x182981590213 (664 MHz)
    MWAIT C-States.....................: 1319200

    Model Specific Registers (MSRs)
    ---------------------------------------

    MSR_CORE_THREAD_COUNT..........(0x35) : 0x40008
    ----------------------------------------
    - Core Count......................... : 4
    - Thread Count....................... : 8

    MSR_PLATFORM_INFO..............(0xCE) : 0x80838F1012800
    ----------------------------------------
    - Maximum Non-Turbo Ratio............ : 40
    - Ratio Limit for Turbo Mode......... : 1 (programmable)
    - TDP Limit for Turbo Mode........... : 1 (programmable)
    - Low Power Mode Support............. : 0 (LMP not supported)
    - Number of ConfigTDP Levels......... : 0 (only base TDP level available)
    - Maximum Efficiency Ratio........... : 8
    - Minimum Operating Ratio............ : 8

    MSR_PMG_CST_CONFIG_CONTROL.....(0xE2) : 0x7E000008
    ----------------------------------------
    - I/O MWAIT Redirection Enable....... : 0 (not enabled)
    - CFG Lock........................... : 0 (MSR not locked)
    - C3 State Auto Demotion............. : 1 (enabled)
    - C1 State Auto Demotion............. : 1 (enabled)
    - C3 State Undemotion................ : 1 (enabled)
    - C1 State Undemotion................ : 1 (enabled)
    - Package C-State Auto Demotion...... : 1 (enabled)
    - Package C-State Undemotion......... : 1 (enabled)

    MSR_PMG_IO_CAPTURE_BASE........(0xE4) : 0x0
    ----------------------------------------
    - LVL_2 Base Address................. : 0x0
    - C-state Range...................... : 0 (C-States not included, I/O MWAIT redirection not enabled)

    IA32_MPERF.....................(0xE7) : 0xEB4E84DFC4
    IA32_APERF.....................(0xE8) : 0xDD52AAE71E

    MSR_FLEX_RATIO.................(0x194) : 0xF0000
    ----------------------------------------

    MSR_IA32_PERF_STATUS...........(0x198) : 0x2DB000002A00
    ----------------------------------------
    - Current Performance State Value.... : 0x2a00

    MSR_IA32_PERF_CONTROL..........(0x199) : 0x2A00
    ----------------------------------------
    - Target performance State Value..... : 0x2A00
    - Intel Dynamic Acceleration......... : 0 (IDA engaged)

    IA32_CLOCK_MODULATION..........(0x19A) : 0x0
    IA32_THERM_STATUS..............(0x19C) : 0x88420000

    IA32_MISC_ENABLES..............(0x1A0) : 0x850089
    ----------------------------------------
    - Fast-Strings....................... : 1 (enabled)
    - Automatic Thermal Control Circuit.. : 1 (enabled)
    - Performance Monitoring............. : 1 (available)
    - Enhanced Intel SpeedStep Technology : 1 (enabled)

    MSR_MISC_PWR_MGMT..............(0x1AA) : 0x401CC1
    ----------------------------------------
    - EIST Hardware Coordination......... : 1 (disabled)

    MSR_TURBO_RATIO_LIMIT..........(0x1AD) : 0x2A2A2A2A
    ----------------------------------------
    - Maximum Ratio Limit for C01........ : 42
    - Maximum Ratio Limit for C02........ : 42
    - Maximum Ratio Limit for C03........ : 42
    - Maximum Ratio Limit for C04........ : 42

    IA32_ENERGY_PERF_BIAS..........(0x1B0) : 0x1
    ----------------------------------------
    - Power Policy Preference.............: 1 (highest performance)

    MSR_POWER_CTL..................(0x1FC) : 0x2C005F
    MSR_RAPL_POWER_UNIT............(0x606) : 0xA0E03
    MSR_PKG_POWER_LIMIT............(0x610) : 0x42FFFF001BFFFF
    MSR_PKG_ENERGY_STATUS..........(0x611) : 0x5A4C7533
    MSR_PKG_POWER_INFO.............(0x614) : 0x2F8
    MSR_PP0_POWER_LIMIT............(0x638) : 0x0
    MSR_PP0_ENERGY_STATUS..........(0x639) : 0x11AF5177
    MSR_TURBO_ACTIVATION_RATIO.....(0x64C) : 0x0
    MSR_PKGC6_IRTL.................(0x60b) : 0x0
    MSR_PKGC7_IRTL.................(0x60c) : 0x0
    MSR_PKG_C2_RESIDENCY...........(0x60d) : 0x1381F4151510
    MSR_PKG_C3_RESIDENCY...........(0x3f8) : 0x0
    MSR_PKG_C6_RESIDENCY...........(0x3f9) : 0x0
    MSR_PKG_C7_RESIDENCY...........(0x3fa) : 0x0
    IA32_TSC_DEADLINE..............(0x6E0) : 0x1829859E4BE6
    (HWP Disabled)

    CPU Ratio Info:
    ----------------------------------------
    CPU Maximum Efficiency Ratio...........: 800 MHz
    CPU Maximum non-Turbo Frequency........: 4000 MHz
    CPU Maximum Turbo Frequency............: 4200 MHz

  6. This is my i7-6700HQ

    AppleIntelInfo.kext v1.6 Copyright © 2012-2016 Pike R. Alpha. All rights reserved

    Settings:
    ------------------------------------
    logMSRs............................: 1
    logIGPU............................: 1
    logCStates.........................: 1
    logIPGStyle........................: 1
    InitialTSC.........................: 0x2d96f6b514 (7 MHz)
    MWAIT C-States.....................: 286531872

    Model Specific Registers (MSRs)
    ---------------------------------------

    MSR_CORE_THREAD_COUNT..........(0x35) : 0x40008
    ----------------------------------------
    - Core Count......................... : 4
    - Thread Count....................... : 8

    MSR_PLATFORM_INFO..............(0xCE) : 0x8083BF1011A00
    ----------------------------------------
    - Maximum Non-Turbo Ratio............ : 26
    - Ratio Limit for Turbo Mode......... : 1 (programmable)
    - TDP Limit for Turbo Mode........... : 1 (programmable)
    - Low Power Mode Support............. : 1 (LPM supported)
    - Number of ConfigTDP Levels......... : 1 (additional TDP level(s) available)
    - Maximum Efficiency Ratio........... : 8
    - Minimum Operating Ratio............ : 8

    MSR_PMG_CST_CONFIG_CONTROL.....(0xE2) : 0x1E008006
    ----------------------------------------
    - I/O MWAIT Redirection Enable....... : 0 (not enabled)
    - CFG Lock........................... : 1 (MSR locked until next reset)
    - C3 State Auto Demotion............. : 1 (enabled)
    - C1 State Auto Demotion............. : 1 (enabled)
    - C3 State Undemotion................ : 1 (enabled)
    - C1 State Undemotion................ : 1 (enabled)
    - Package C-State Auto Demotion...... : 0 (disabled/unsupported)
    - Package C-State Undemotion......... : 0 (disabled/unsupported)

    MSR_PMG_IO_CAPTURE_BASE........(0xE4) : 0x51814
    ----------------------------------------
    - LVL_2 Base Address................. : 0x1814
    - C-state Range...................... : 5 (C-States not included, I/O MWAIT redirection not enabled)

    IA32_MPERF.....................(0xE7) : 0xB7D6507A6
    IA32_APERF.....................(0xE8) : 0xD405661FC

    MSR_FLEX_RATIO.................(0x194) : 0x0
    ----------------------------------------

    MSR_IA32_PERF_STATUS...........(0x198) : 0x24CE00002000
    ----------------------------------------
    - Current Performance State Value.... : 0x2000

    MSR_IA32_PERF_CONTROL..........(0x199) : 0x2300
    ----------------------------------------
    - Target performance State Value..... : 0x2300
    - Intel Dynamic Acceleration......... : 0 (IDA engaged)

    IA32_CLOCK_MODULATION..........(0x19A) : 0x0
    IA32_THERM_STATUS..............(0x19C) : 0x88320800

    IA32_MISC_ENABLES..............(0x1A0) : 0x850089
    ----------------------------------------
    - Fast-Strings....................... : 1 (enabled)
    - Automatic Thermal Control Circuit.. : 1 (enabled)
    - Performance Monitoring............. : 1 (available)
    - Enhanced Intel SpeedStep Technology : 1 (enabled)

    MSR_MISC_PWR_MGMT..............(0x1AA) : 0x401CC1
    ----------------------------------------
    - EIST Hardware Coordination......... : 1 (disabled)

    MSR_TURBO_RATIO_LIMIT..........(0x1AD) : 0x1F202123
    ----------------------------------------
    - Maximum Ratio Limit for C01........ : 35
    - Maximum Ratio Limit for C02........ : 33
    - Maximum Ratio Limit for C03........ : 32
    - Maximum Ratio Limit for C04........ : 31

    IA32_ENERGY_PERF_BIAS..........(0x1B0) : 0x1
    ----------------------------------------
    - Power Policy Preference.............: 1 (highest performance)

    MSR_POWER_CTL..................(0x1FC) : 0x24005F
    MSR_RAPL_POWER_UNIT............(0x606) : 0xA0E03
    MSR_PKG_POWER_LIMIT............(0x610) : 0x4281C000DD8168
    MSR_PKG_ENERGY_STATUS..........(0x611) : 0xF2FC3A
    MSR_PKG_POWER_INFO.............(0x614) : 0x168
    MSR_PP0_POWER_LIMIT............(0x638) : 0x0
    MSR_PP0_ENERGY_STATUS..........(0x639) : 0xB44A12
    MSR_TURBO_ACTIVATION_RATIO.....(0x64C) : 0x0
    MSR_PKGC6_IRTL.................(0x60b) : 0x8876
    MSR_PKGC7_IRTL.................(0x60c) : 0x8894
    MSR_PKG_C2_RESIDENCY...........(0x60d) : 0x4DC642B54
    MSR_PKG_C3_RESIDENCY...........(0x3f8) : 0x730DF2D4C
    MSR_PKG_C6_RESIDENCY...........(0x3f9) : 0x0
    MSR_PKG_C7_RESIDENCY...........(0x3fa) : 0x0
    IA32_TSC_DEADLINE..............(0x6E0) : 0x2D9816050F
    (HWP Disabled)

    CPU Ratio Info:
    ----------------------------------------
    CPU Maximum Efficiency Ratio...........: 800 MHz
    CPU Maximum non-Turbo Frequency........: 2600 MHz
    CPU Maximum Turbo Frequency............: 3500 MHz

    IGPU Info:
    ----------------------------------------
    IGPU Current Frequency.................: 1050 MHz
    IGPU Minimum Frequency.................: 350 MHz
    IGPU Maximum Non-Turbo Frequency.......: 350 MHz
    IGPU Maximum Turbo Frequency...........: 1050 MHz
    IGPU Maximum limit.....................: No Limit

    • i7 5820K – ASUS X99/A 3.1 – 10.12 Beta (16A313a)

      Here my output with:

      EIST Disabled

      Following MSRs currently disabled:
      0xE2 = MSR_PKG_CST_CONFIG_ CONTROL
      0x1A0 = IA32_MISC_ENABLE
      0x1FC = MSR_POWER_CTL
      0x1AA = MSR_MISC_PWR_MGMT
      0x620 = Unknown MSR name
      0x64C = MSR_TURBO_ACTIVATION_RATIO
      0x63A = MSR_PP0_POLICY
      0x642 = MSR_PP1_POLICY

      Stability is much better, still jumping back and forth to max turbo speed as per Photograph posts.

      AppleIntelInfo.kext v1.6 Copyright © 2012-2016 Pike R. Alpha. All rights reserved

      Settings:
      ------------------------------------
      logMSRs............................: 1
      logIGPU............................: 0
      logCStates.........................: 1
      logIPGStyle........................: 1
      InitialTSC.........................: 0xcc1a1450637 (425 MHz)
      MWAIT C-States.....................: 8480

      Model Specific Registers (MSRs)
      ---------------------------------------

      MSR_CORE_THREAD_COUNT..........(0x35) : 0x6000C
      ----------------------------------------
      - Core Count......................... : 6
      - Thread Count....................... : 12

      MSR_PLATFORM_INFO..............(0xCE) : 0x20080C3BF3812100
      ----------------------------------------
      - Maximum Non-Turbo Ratio............ : 33
      - Ratio Limit for Turbo Mode......... : 1 (programmable)
      - TDP Limit for Turbo Mode........... : 1 (programmable)
      - Low Power Mode Support............. : 1 (LPM supported)
      - Number of ConfigTDP Levels......... : 1 (additional TDP level(s) available)
      - Maximum Efficiency Ratio........... : 12
      - Minimum Operating Ratio............ : 8

      MSR_PMG_CST_CONFIG_CONTROL.....(0xE2) : 0x402
      ----------------------------------------
      - I/O MWAIT Redirection Enable....... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)
      - CFG Lock........................... : 0 (MSR not locked)
      - C3 State Auto Demotion............. : 0 (disabled/unsupported)
      - C1 State Auto Demotion............. : 0 (disabled/unsupported)
      - C3 State Undemotion................ : 0 (disabled/unsupported)
      - C1 State Undemotion................ : 0 (disabled/unsupported)
      - Package C-State Auto Demotion...... : 0 (disabled/unsupported)
      - Package C-State Undemotion......... : 0 (disabled/unsupported)

      MSR_PMG_IO_CAPTURE_BASE........(0xE4) : 0x10414
      ----------------------------------------
      - LVL_2 Base Address................. : 0x414
      - C-state Range...................... : 1 (C6 is the max C-State to include
      )

      IA32_MPERF.....................(0xE7) : 0x95277E583
      IA32_APERF.....................(0xE8) : 0xC9AE8C72E

      MSR_FLEX_RATIO.................(0x194) : 0xE0000
      ----------------------------------------

      MSR_IA32_PERF_STATUS...........(0x198) : 0x29FA00002E00
      ----------------------------------------
      - Current Performance State Value.... : 0x2e00

      MSR_IA32_PERF_CONTROL..........(0x199) : 0x2100
      ----------------------------------------
      - Target performance State Value..... : 0x2100
      - Intel Dynamic Acceleration......... : 0 (IDA engaged)

      IA32_CLOCK_MODULATION..........(0x19A) : 0x0
      IA32_THERM_STATUS..............(0x19C) : 0x883B0000

      IA32_MISC_ENABLES..............(0x1A0) : 0x840089
      ----------------------------------------
      - Fast-Strings....................... : 1 (enabled)
      - Automatic Thermal Control Circuit.. : 1 (enabled)
      - Performance Monitoring............. : 1 (available)
      - Enhanced Intel SpeedStep Technology : 0 (disabled)

      MSR_MISC_PWR_MGMT..............(0x1AA) : 0x400000
      ----------------------------------------
      - EIST Hardware Coordination......... : 0 (enabled)

      MSR_TURBO_RATIO_LIMIT..........(0x1AD) : 0x22222E2E2E2E2E2E
      ----------------------------------------
      - Maximum Ratio Limit for C01........ : 46
      - Maximum Ratio Limit for C02........ : 46
      - Maximum Ratio Limit for C03........ : 46
      - Maximum Ratio Limit for C04........ : 46
      - Maximum Ratio Limit for C05........ : 46
      - Maximum Ratio Limit for C06........ : 46

      IA32_ENERGY_PERF_BIAS..........(0x1B0) : 0x0
      ----------------------------------------
      - Power Policy Preference.............: 0 (highest performance)

      MSR_POWER_CTL..................(0x1FC) : 0x2904005B
      MSR_RAPL_POWER_UNIT............(0x606) : 0xA0E03
      MSR_PKG_POWER_LIMIT............(0x610) : 0x7FFF80015FFF8
      MSR_PKG_ENERGY_STATUS..........(0x611) : 0xD5F37
      MSR_PKG_POWER_INFO.............(0x614) : 0x1280460
      MSR_PP0_POWER_LIMIT............(0x638) : 0x0
      MSR_PP0_ENERGY_STATUS..........(0x639) : 0x0
      MSR_TURBO_ACTIVATION_RATIO.....(0x64C) : 0x0
      MSR_PKGC6_IRTL.................(0x60b) : 0x0
      MSR_PKG_C2_RESIDENCY...........(0x60d) : 0x30B4E41E0
      MSR_PKG_C6_RESIDENCY...........(0x3f9) : 0xBBEE9195A
      IA32_TSC_DEADLINE..............(0x6E0) : 0xCC1A459902D

      CPU Ratio Info:
      ----------------------------------------
      CPU Maximum Efficiency Ratio...........: 1200 MHz
      CPU Maximum non-Turbo Frequency........: 3300 MHz
      CPU Maximum Turbo Frequency............: 4600 MHz

  7. AppleIntelInfo.kext v1.6 Copyright © 2012-2016 Pike R. Alpha. All rights reserved

    Settings:
    ------------------------------------
    logMSRs............................: 1
    logIGPU............................: 1
    logCStates.........................: 1
    logIPGStyle........................: 1
    InitialTSC.........................: 0x280e8e15719f (1101 MHz)
    MWAIT C-States.....................: 1319200

    Model Specific Registers (MSRs)
    ---------------------------------------

    MSR_CORE_THREAD_COUNT..........(0x35) : 0x40008
    ----------------------------------------
    - Core Count......................... : 4
    - Thread Count....................... : 8

    MSR_PLATFORM_INFO..............(0xCE) : 0x80838F1012800
    ----------------------------------------
    - Maximum Non-Turbo Ratio............ : 40
    - Ratio Limit for Turbo Mode......... : 1 (programmable)
    - TDP Limit for Turbo Mode........... : 1 (programmable)
    - Low Power Mode Support............. : 0 (LMP not supported)
    - Number of ConfigTDP Levels......... : 0 (only base TDP level available)
    - Maximum Efficiency Ratio........... : 8
    - Minimum Operating Ratio............ : 8

    MSR_PMG_CST_CONFIG_CONTROL.....(0xE2) : 0x7E000008
    ----------------------------------------
    - I/O MWAIT Redirection Enable....... : 0 (not enabled)
    - CFG Lock........................... : 0 (MSR not locked)
    - C3 State Auto Demotion............. : 1 (enabled)
    - C1 State Auto Demotion............. : 1 (enabled)
    - C3 State Undemotion................ : 1 (enabled)
    - C1 State Undemotion................ : 1 (enabled)
    - Package C-State Auto Demotion...... : 1 (enabled)
    - Package C-State Undemotion......... : 1 (enabled)

    MSR_PMG_IO_CAPTURE_BASE........(0xE4) : 0x31814
    ----------------------------------------
    - LVL_2 Base Address................. : 0x1814
    - C-state Range...................... : 3 (C-States not included, I/O MWAIT redirection not enabled)

    IA32_MPERF.....................(0xE7) : 0x36BEE921EAE
    IA32_APERF.....................(0xE8) : 0x356EC06B33B

    MSR_FLEX_RATIO.................(0x194) : 0xE0000
    ----------------------------------------

    MSR_IA32_PERF_STATUS...........(0x198) : 0x29FD00002800
    ----------------------------------------
    - Current Performance State Value.... : 0x2800

    MSR_IA32_PERF_CONTROL..........(0x199) : 0x2A00
    ----------------------------------------
    - Target performance State Value..... : 0x2A00
    - Intel Dynamic Acceleration......... : 0 (IDA engaged)

    IA32_CLOCK_MODULATION..........(0x19A) : 0x0
    IA32_THERM_STATUS..............(0x19C) : 0x883E0000

    IA32_MISC_ENABLES..............(0x1A0) : 0x850089
    ----------------------------------------
    - Fast-Strings....................... : 1 (enabled)
    - Automatic Thermal Control Circuit.. : 1 (enabled)
    - Performance Monitoring............. : 1 (available)
    - Enhanced Intel SpeedStep Technology : 1 (enabled)

    MSR_MISC_PWR_MGMT..............(0x1AA) : 0x18C1
    ----------------------------------------
    - EIST Hardware Coordination......... : 1 (disabled)

    MSR_TURBO_RATIO_LIMIT..........(0x1AD) : 0x2828282A
    ----------------------------------------
    - Maximum Ratio Limit for C01........ : 42
    - Maximum Ratio Limit for C02........ : 40
    - Maximum Ratio Limit for C03........ : 40
    - Maximum Ratio Limit for C04........ : 40

    IA32_ENERGY_PERF_BIAS..........(0x1B0) : 0x1
    ----------------------------------------
    - Power Policy Preference.............: 1 (highest performance)

    MSR_POWER_CTL..................(0x1FC) : 0x2C005F
    MSR_RAPL_POWER_UNIT............(0x606) : 0xA0E03
    MSR_PKG_POWER_LIMIT............(0x610) : 0x42FFD0001AEA82
    MSR_PKG_ENERGY_STATUS..........(0x611) : 0x5A7D347A
    MSR_PKG_POWER_INFO.............(0x614) : 0x2F8
    MSR_PP0_POWER_LIMIT............(0x638) : 0x0
    MSR_PP0_ENERGY_STATUS..........(0x639) : 0x52037A4A
    MSR_TURBO_ACTIVATION_RATIO.....(0x64C) : 0x0
    MSR_PKGC6_IRTL.................(0x60b) : 0x8876
    MSR_PKGC7_IRTL.................(0x60c) : 0x8894
    MSR_PKG_C2_RESIDENCY...........(0x60d) : 0x50101F48F60
    MSR_PKG_C3_RESIDENCY...........(0x3f8) : 0x1AE80BD68B8
    MSR_PKG_C6_RESIDENCY...........(0x3f9) : 0xEF03120E240
    MSR_PKG_C7_RESIDENCY...........(0x3fa) : 0x0
    IA32_TSC_DEADLINE..............(0x6E0) : 0x280E91CE320D
    (HWP Disabled)

    CPU Ratio Info:
    ----------------------------------------
    CPU Maximum Efficiency Ratio...........: 800 MHz
    CPU Maximum non-Turbo Frequency........: 4000 MHz
    CPU Maximum Turbo Frequency............: 4200 MHz

    IGPU Info:
    ----------------------------------------
    IGPU Current Frequency.................: 0 MHz
    IGPU Minimum Frequency.................: 350 MHz
    IGPU Maximum Non-Turbo Frequency.......: 350 MHz
    IGPU Maximum Turbo Frequency...........: 1150 MHz
    IGPU Maximum limit....................: 3000 MHz

  8. Pike, I have a problem with loading the kext. It’s on my desktop and owned by root:wheel, but I’m getting the following messages in Console:

    9/10/16 10:18:20.371 AM com.apple.kextd[47]: kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext “/Users/philip/Desktop/AppleIntelInfo.kext”
    9/10/16 10:18:20.450 AM com.apple.kextd[47]: kext signature failure override allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext “/Users/philip/Desktop/AppleIntelInfo.kext”

    Any ideas what could be wrong? SIP is completely off (BooterConfig=0x28 and CsrActiveConfig=0x67).

  9. philip@ProBook-4340s:~$ sudo cat /tmp/AppleIntelInfo.dat

    AppleIntelInfo.kext v1.8 Copyright © 2012-2016 Pike R. Alpha. All rights reserved

    Settings:
    ------------------------------------------
    logMSRs..................................: 1
    logIGPU..................................: 1
    logCStates...............................: 1
    logIPGStyle..............................: 1

    Warning: Clover hw.busfrequency error detected : 17d78400
    InitialTSC...............................: 0x3bda50b4a025 (2531 MHz)
    MWAIT C-States...........................: 135456

    Processor Brandstring....................: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz

    Processor Signature..................... : 0x306A9
    ------------------------------------------
    - Family............................... : 6
    - Stepping............................. : 9
    - Model................................ : 0x3A (58)

    Model Specific Registers (MSRs)
    ------------------------------------------

    MSR_CORE_THREAD_COUNT............(0x35) : 0x20004
    ------------------------------------------
    - Core Count........................... : 2
    - Thread Count......................... : 4

    MSR_PLATFORM_INFO................(0xCE) : 0x80C10E0011A00
    ------------------------------------------
    - Maximum Non-Turbo Ratio.............. : 0x1A (2600 MHz)
    - Ratio Limit for Turbo Mode........... : 0 (not programmable)
    - TDP Limit for Turbo Mode............. : 1 (programmable)
    - Low Power Mode Support............... : 0 (LMP not supported)
    - Number of ConfigTDP Levels........... : 0 (only base TDP level available)
    - Maximum Efficiency Ratio............. : 12
    - Minimum Operating Ratio.............. : 8

    MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x1E008404
    ------------------------------------------
    - I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)
    - CFG Lock............................. : 1 (MSR locked until next reset)
    - C3 State Auto Demotion............... : 1 (enabled)
    - C1 State Auto Demotion............... : 1 (enabled)
    - C3 State Undemotion.................. : 1 (enabled)
    - C1 State Undemotion.................. : 1 (enabled)
    - Package C-State Auto Demotion........ : 0 (disabled/unsupported)
    - Package C-State Undemotion........... : 0 (disabled/unsupported)

    MSR_PMG_IO_CAPTURE_BASE..........(0xE4) : 0x20414
    ------------------------------------------
    - LVL_2 Base Address................... : 0x414
    - C-state Range........................ : 2 (C7 is the max C-State to include)

    IA32_MPERF.......................(0xE7) : 0x10B66B294C4A
    IA32_APERF.......................(0xE8) : 0x57C542981EC

    MSR_FLEX_RATIO...................(0x194) : 0x100000
    ------------------------------------------

    MSR_IA32_PERF_STATUS.............(0x198) : 0x1E6C00001E00
    ------------------------------------------
    - Current Performance State Value...... : 0x1E00 (3000 MHz)

    MSR_IA32_PERF_CONTROL............(0x199) : 0x1E1A
    ------------------------------------------
    - Target performance State Value....... : 0x1E1A (3000 MHz)
    - Intel Dynamic Acceleration........... : 0 (IDA engaged)

    IA32_CLOCK_MODULATION............(0x19A) : 0x0
    IA32_THERM_STATUS................(0x19C) : 0x88300000

    IA32_MISC_ENABLES................(0x1A0) : 0x850089
    ------------------------------------------
    - Fast-Strings......................... : 1 (enabled)
    - Automatic Thermal Control Circuit.... : 1 (enabled)
    - Performance Monitoring............... : 1 (available)
    - Enhanced Intel SpeedStep Technology.. : 1 (enabled)

    MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x1691200
    ------------------------------------------
    - Turbo Attenuation Units.............. : 0
    - Temperature Target................... : 105
    - TCC Activation Offset................ : 1

    MSR_MISC_PWR_MGMT................(0x1AA) : 0x400001
    ------------------------------------------
    - EIST Hardware Coordination........... : 1 (disabled)

    MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x1E1E1E20
    ------------------------------------------
    - Maximum Ratio Limit for C01.......... : 20 (3200 MHz)
    - Maximum Ratio Limit for C02.......... : 1E (3000 MHz)

    IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x4
    ------------------------------------------

    MSR_POWER_CTL....................(0x1FC) : 0x14005F
    ------------------------------------------
    - C1E Enable............................: 1

    MSR_RAPL_POWER_UNIT..............(0x606) : 0xA1003
    ------------------------------------------
    - Power Units.......................... : 3 (1/8 Watt)
    - Energy Status Units.................. : 16 (15.3 micro-Joules)
    - Time Units .......................... : 10 (976.6 micro-Seconds)

    MSR_PKG_POWER_LIMIT..............(0x610) : 0x815E00DC8118
    ------------------------------------------
    - Package Power Limit #1............... : 35 Watt
    - Enable Power Limit #1................ : 1 (enabled)
    - Package Clamping Limitation #1....... : 0 (disabled)
    - Time Window for Power Limit #1....... : 110 (163840 milli-Seconds)
    - Package Power Limit #2............... : 43 Watt
    - Enable Power Limit #2................ : 1 (enabled)
    - Package Clamping Limitation #2....... : 0 (disabled)
    - Time Window for Power Limit #2....... : 0 (2 milli-Seconds)
    - Lock................................. : 0 (MSR not locked)

    MSR_PKG_ENERGY_STATUS............(0x611) : 0x40E9DF9C
    ------------------------------------------
    - Total Energy Consumed................ : 16617 Joules (Watt = Joules / seconds)

    MSR_PKG_POWER_INFO...............(0x614) : 0x10000000C00118
    ------------------------------------------
    - Thermal Spec Power................... : 35 Watt
    - Minimum Power........................ : 0
    - Maximum Power........................ : 0
    - Maximum Time Window.................. : 0

    MSR_PP0_POWER_LIMIT..............(0x638) : 0x0

    MSR_PP0_ENERGY_STATUS............(0x639) : 0x391495D8
    ------------------------------------------
    - Total Energy Consumed................ : 14612 Joules (Watt = Joules / seconds)

    MSR_TURBO_ACTIVATION_RATIO.......(0x64C) : 0x0
    MSR_PP1_CURRENT_CONFIG...........(0x602) : 0x1814149480000170

    MSR_PP1_POWER_LIMIT..............(0x640) : 0x0

    MSR_PP1_ENERGY_STATUS............(0x641) : 0x14D8A14D
    ------------------------------------------
    - Total Energy Consumed................ : 5336 Joules (Watt = Joules / seconds)

    MSR_PP1_POLICY...................(0x642) : 0x10
    ------------------------------------------
    - Priority Level....................... : 16

    MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x1A
    MSR_CONFIG_TDP_LEVEL1............(0x649) : 0xC0000000000000
    MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0xC0000000000000
    MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x80000000
    MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0
    MSR_PKGC3_IRTL...................(0x60a) : 0x883B
    MSR_PKGC6_IRTL...................(0x60b) : 0x8850
    MSR_PKGC7_IRTL...................(0x60c) : 0x8857
    MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x379A0C1EE5A
    MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x375AD29E6A
    MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x2817EB02176
    MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x177132F0C650

    IA32_TSC_DEADLINE................(0x6E0) : 0x3BDA549CB575

    CPU Ratio Info:
    ------------------------------------------
    Base Clock Frequency (BLCK)............. : 100 MHz
    Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz)
    Maximum non-Turbo Ratio/Frequency........: 26 (2600 MHz)
    Maximum Turbo Ratio/Frequency............: 32 (3200 MHz)

    IGPU Info:
    ------------------------------------------
    IGPU Current Frequency...................: 350 MHz
    IGPU Minimum Frequency...................: 350 MHz
    IGPU Maximum Non-Turbo Frequency.........: 650 MHz
    IGPU Maximum Turbo Frequency.............: 1100 MHz
    IGPU Maximum limit.......................: No Limit

    P-State ratio * 100 = Frequency in MHz
    ------------------------------------------
    CPU P-States [ (12) 23 30 ] iGPU P-States [ (7) ]
    CPU C3-Cores [ 1 2 ]
    CPU C6-Cores [ 0 1 3 ]
    CPU C7-Cores [ 0 1 2 3 ]
    CPU P-States [ (12) 23 26 30 ] iGPU P-States [ (7) ]
    CPU C3-Cores [ 0 1 2 ]
    CPU C6-Cores [ 0 1 2 3 ]
    CPU P-States [ (12) 20 23 26 30 ] iGPU P-States [ (7) ]
    CPU C3-Cores [ 0 1 2 3 ]
    CPU P-States [ (12) 20 23 26 27 30 ] iGPU P-States [ (7) ]
    CPU P-States [ (12) 17 20 23 26 27 30 ] iGPU P-States [ (7) ]
    CPU P-States [ 12 17 20 (22) 23 26 27 30 ] iGPU P-States [ (7) ]
    CPU P-States [ 12 17 20 (22) 23 24 26 27 30 ] iGPU P-States [ (7) ]
    CPU P-States [ 12 17 19 20 (22) 23 24 26 27 30 ] iGPU P-States [ (7) ]
    CPU P-States [ (12) 17 18 19 20 22 23 24 26 27 30 ] iGPU P-States [ (7) ]
    CPU P-States [ 12 16 17 18 19 20 (22) 23 24 26 27 30 ] iGPU P-States [ (7) ]
    CPU P-States [ 12 16 17 18 19 20 22 23 24 (26) 27 30 ] iGPU P-States [ 7 (18) ]
    CPU P-States [ (12) 16 17 18 19 20 21 22 23 24 26 27 30 ] iGPU P-States [ (7) 18 ]
    CPU P-States [ 12 15 16 17 18 19 20 21 (22) 23 24 26 27 30 ] iGPU P-States [ (7) 18 ]
    CPU P-States [ 12 15 16 17 18 19 20 21 22 23 24 26 27 30 (32) ] iGPU P-States [ 7 (8) 18 ]
    CPU P-States [ 12 15 16 17 18 19 20 21 22 23 24 25 (26) 27 30 32 ] iGPU P-States [ (7) 8 18 ]
    CPU P-States [ 12 15 16 17 18 19 20 21 (22) 23 24 25 26 27 28 30 32 ] iGPU P-States [ (7) 8 18 ]

    But there is nothing in Console. Is that normal?

  10. Warning: Clover hw.busfrequency error detected : 17d78400
    InitialTSC………………………….: 0x1f7a2b22ebe4 (1504 MHz)
    MWAIT C-States………………………: 286531872

    What is the error?? Does I need set busfrequency manually in clover??

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s