Late 2014 iMac and Macmini serials

Good news. I have updated Apple Serial Numbers Ending With G000-GZZZ and added the late 2014 Mac mini and iMac with Retina 5K display.
Macmini71
Here is a list with new serial numbers. Well. The last four characters that is.

GCVH – Mac mini (Late 2014)
GCVG – Mac mini (Late 2014)
GCVV – Mac mini (Late 2014)
GCVP – Mac mini (Late 2014)
GCW1 – Mac mini (Late 2014)
GCVY – Mac mini (Late 2014)
GCVN – Mac mini (Late 2014)
GCVW – Mac mini (Late 2014)
GCW0 – Mac mini (Late 2014)
GCVQ – Mac mini (Late 2014)

Processor

– 1.4GHz dual-core Intel Core i5 (Turbo Boost up to 2.7GHz) with 3MB on-chip shared L3 cache
– 2.6GHz dual-core Intel Core i5 (Turbo Boost up to 3.1GHz) with 3MB on-chip shared L3 cache
– Configurable to 3.0GHz dual-core Intel Core i7 (Turbo Boost up to 3.5GHz) with 4MB on-chip shared L3 cache.
– 2.8GHz dual-core Intel Core i5 (Turbo Boost up to 3.3GHz) with 3MB on-chip shared L3 cache
– Configurable to 3.0GHz dual-core Intel Core i7 (Turbo Boost up to 3.5GHz) with 4MB on-chip shared L3 cache.

Supported board-id: Mac-81E3E92DD6088272 Mac-35C5E08120C7EEAF

Edit: I accidentally copied the board-id of the iMac14,4 (21.5-inch) and thus this isn’t the one used by the late 2014 Mac mini.

Here is the, still only one, serial number that is used by the late 2014 iMac with Retina 5K display

GCTM – iMac (Retina 5K, 27-inch, Late 2014)

Supported board-id: Mac-42FD25EABCABB274 and Mac-FA842E06C61E91C5

Processor

– 3.5GHz quad-core Intel Core i5 processor (Turbo Boost up to 3.9GHz)
– Configurable to 4.0GHz quad-core Intel Core i7 (Turbo Boost up to 4.4GHz).

Advertisements

5 thoughts on “Late 2014 iMac and Macmini serials

  1. I wonder if macmini 7,1 is capable to support 4K UHD displays @60 Hz (Single Stream Transport or Multi Stream Transport), because according to Apple here http://support.apple.com/en-us/HT202856 only a few SST displays @30 Hz are supported. And what about MST? Of course I’m talking about integrated HD 4600, not discrete graphics. In Windows 8.1 64 bit everything works fine (even MST monitor @60 Hz), that leads me to think there must be a way to make HD4600 working that way in OS X. What do you think?

    I mean hackintosh with Macmini7,1 System Definition, of course

  2. Well, I can’t reach Ultra HD (HiDPI 1920×1080) with OS X with HD4600 through DisplayPort
    The set up:
    – ASRock Z97 Extreme6 (last bios available)
    – Intel i7 4790K
    – Yosemite 10.10.1
    – Clover in EFI partition (UEFI mode Bios)
    – Azul patched on clover
    – System Definition Macmini7,1 with board id Mac-35C5E08120C7EEAF
    – 24″ Monitor Nec MultiSync EA244UHD Multi Stream Transport.
    Here http://www.mediafire.com/download/a3exqaa69c6hkzs/macmini7%2C1+edid.zip I attached EDID from Windows, EDID extracted in OS X with grep terminal command, then with Darwin Dumper. Also you’ll find a screenshot with all display resolution available, a copy of IOReg and the config.plist file for Clover
    Maybe my thinking is wrong, but if we have UHD in Windows, then why can’t we reach it under OS X?

    Before I forget: same results with iMac15,1 SysDef

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s